Achieving a really finished look that makes the garage an extension of the rest of your home means thinking about the interior design just as you would any other room. Instead of thinking about the wall, floor or organization as their own projects, think of the wall treatment as part of a whole design especially where the wall meets the floor.

Polyaspartic Coated Wall Base & Floor
BEFORE – right garage wall

AFTER – left garage wall

You can design the space simply by finishing the floors, adding some slatwall, baskets, racks, and hooks. Or you can transform your garage into a room that your family will enjoy using by designing a stunning space with cabinets, a workbench, or even a second level. Whichever route you choose, an important consideration will be where your floor meets the wall. You wouldn’t think of laying carpet or hardwood in your house and not finishing it with a baseboard. The same is true for the garage. And depending on the type of flooring and walls you have, baseboards provide protection from dust, dirt and water seeping behind the drywall or slatwall.

When you’re choosing a baseboard, look first to what is on the walls and the floors. Wall protection is essential in garages where the drywall goes right down to the floor. Water can seep into the drywall at the bottom of the wall and cause crumbling over time. 

If your garage floor is PVC tiling, you can use 6-inch vinyl baseboards. The baseboard is glued to the wall and will protect against any water that may seep into the drywall, or under the tiles and create mildew. 

Polyaspartic flooring is always a great choice for any garage, but especially those with drywall that extends down to the floor. You can go with the standard 6-inch vinyl baseboard, or we can create a baseboard from 3/4″ plywood and then apply the polyaspartic flooring and continue it up over the wood to create a neat and unified baseboard. 

Drywall higher up can also be damaged from, spray from hoses, moisture from damp weather, or water dripping from skis, toboggans and tools. A wainscoting treatment protects against this and looks great too. 

Punched Aluminum Wainscoting
Where Garage Wall meets Garage Floor

Punched aluminum wainscoting provides a modern industrial look that also provides great protection for the drywall. It can be used with any type of flooring. The walls are protected and the wall/floor joint is caulked to prevent any water seepage. Car enthusiasts love it because they can wash the car or spray down the aluminum and floors after using the garage as a workshop without fear of water damage to the garage or home. It also protects walls from damage when the car doors swing open inside the garage. 

Now, most garage floors are not level but sloped to allow water run off in the correct direction. Another advantage of using a wainscoting is the top can be leveled to the eye rather than follow the slope of the floor. 

When using an epoxy flooring, it’s best to install a simple vinyl baseboard. The product is  too thin and will run if you try and apply it to a baseboard or a wall. It’s another reason why we recommend using polyaspartic flooring. For the small cost premium, it gives you so many advantages. 

The big decisions are important when designing your garage, but it’s the small details, such as baseboards and wainscoting, that really complete the look.