floor coating Archives - Garage Tailors

If you’ve ever undertaken a large renovation job in your home, such as the kitchen, bathroom or basement, it’s likely you’ve hired a professional to do the job. Usually only the die-hard do-it-yourselfer with a lot of experience will tackle that type of project. But when it comes to the garage, many people think a few tools and a trip to the big-box store to pick up some simple shelving, cabinets and maybe an epoxy floor coating will do. There’s nothing wrong with what they sell there, but the problem is it’s likely not going to stand up to the test of time and use. A professional garage designer has access to the most durable products specifically designed for garages and the equipment, tools and expertise to create an organized garage that will last a lifetime.

What to expect when hiring a garage designer?

Space visualization

During a consultation a professional garage designer will see the potential of the garage. After doing hundreds of garage renovations, I can easily envision what’s possible in a space. Garages are much more than just four walls and a floor. They’re rarely square and a professional will immediately spot areas to maximize storage. Often there are indentations, or areas such as space above the garage door or on the ceiling to create shelves or overhead storage.

Engineering skills

Your garage professional will know about weight/load capacity. Shelving can be custom-designed and built to make the most efficient use of space while supporting a maximum amount of weight and protecting your loved ones and vehicles from damage.

Design skills

Garages can be beautiful too. A garage professional will pay attention to the look of the space just like any interior designer would for a room inside your home. Choosing a combination of colours and finishes for the wall, floor, cabinets and shelves can really enhance the overall look of the space. Also, an experienced professional will be able to offer suggestions to solve any design dilemma.

Tools

If you’ve done DIY projects, you’ve probably experienced the frustration of starting a job and realizing you don’t have the right tool. A garage professional will have tools and equipment needed to complete a quality job. One essential piece of equipment for finishing the floor is a commercial cement floor grinder. In order to achieve a floor coating that will last, the floor needs to be ground down to remove pitting and other imperfections. A floor grinder is an expensive piece of equipment that is usually not available to rent. A nail gun, the right saws and screwdrivers also make for an easier job. Unless you’re doing a lot of construction projects, it’s unlikely you’ll have these types of tools on hand.

Knowledge

There are a lot of things involved in renovating a garage that are not always considered by the average homeowner. Garage professionals know about things such as construction codes, checking moisture levels in concrete before applying a floor coating, and have access to trades such as plumbers and electricians. They can also easily estimate how much space you’ll need to store things. You may look at all your gardening equipment and figure you’ll need a lot of storage room while an expert will know immediately that you’ll only need about six feet of space.

So the choice is up to you. Do you want a temporary solution or do you want to make an investment in your garage that will last?

At this time of year, many of us think about giving our homes a spring clean but what about the garage?

For months, you’ve been driving salt and slush into this outdoor space, so the floor is the first thing to tackle in the garage.

Dirt stuck in cracks in the garage floor will never come out, that’s why it’s important to have a quality floor coating. In a previous post we talked about choosing flooring options. Garage Tailors Garage uses a polyaspartic flooring system that will resist cracks and abrasions for years to come and is 4x more durable than epoxy flooring. And, this flooring is easy to maintain too.

Here’s how to maintain your polyaspartic flooring system:

Use a strong bristle broom to sweep away all loose debris and dust
Fill a bucket with hot water and add a few drops of dishwashing detergent, preferably one that contains a de-greaser, such as Palmolive
Pour the solution on to the garage floor and scrub with your broom. For more aggressive spots such as oil, use a little Varsol and scrub thoughly.
Rinse the floor thoroughly with clean water and remove excess water with a sponge-head mop or shop vac.

With a little TLC, a floor from Garage Tailors Garage will look like new each spring.

If you need more help getting your garage ready for spring and summer, give us a call.

FREE IN-HOME CONSULTATION

What is it that Professional Garage Designers Do?