All You Need To Know About Polyaspartic Garage Flooring
During your search for the right garage flooring, you have possibly come across options for epoxy and a newer product known as Polyaspartic. These concrete coatings look alike, so naturally, you would like to know the dissimilarity. So let us begin here.
Polyaspartic is a hybrid matter that looks like polyurethane and was 1st developed in the ‘90s as a coating for steel in bridges and used for its corrosion-resistant properties. This alternative to epoxy is also known as an aliphatic polyurea sealer, which is a blend of ester and other materials.
The amount of ester can be altered by manufacturers to tailor Polyaspartic to have diverse qualities, such as limited gas emissions and quick drying times post application. Such advances make it more resourceful as compared to traditional epoxy.
Generally, this coating has a clear, polished finish. By itself, it creates the appearance of a wet concrete base. You can add colour to the blend for a bolder appearance if desired. Often, people will distribute decorative chips across the surface of a still-wet coating to bring in a little more colour and non-slip texture.
Applications of Polyaspartic Garage Flooring
The same as the epoxy, Polyaspartic will not appropriately bond to concrete which gives off a lot of moisture. Actually, for the reason that it dries so quickly, applying Polyaspartic is a quick procedure. The appearance and consistency of the material are much like water – it is clear (when not using colour additives), nearly odourless, and very fluid.
You will pour ribbons of Polyaspartic across the floor and evenly spread it with the help of a roller or a squeegee. The layer’s suggested thickness will rely on the manufacturer. In an hour or less, the initial coat will be dry enough to walk on, so you can start the 2nd coating.
This 2nd layer will comprise any non-skid traction materials you might wish to use. Disperse them by dusting them over the top after the 2nd coat is totally spread but not yet dry.
Advantages of Polyaspartic Garage Flooring
- Durable – It dries hard, but it maintains some flexibility. This helps maintain a stain and scratch-resistant finish.
- Colourfast – The colour will not fade or yellow even after extended exposure to UV rays, meaning the garage will keep looking wonderful for longer.
- Air Quality – With low VOCs and virtually no odour from off-gassing, you will be capable of breathing easier.
- Versatile Application – It can be applied in a variety of temperature and weather conditions, so you will not need to wait around for the right time.
- Speed – polyaspartic takes less than 8 hours to apply and is fully cured within 24 hours.
- Maintenance Free – as a result of its strength and durability you’ll never have to worry about your floor needing any maintenance or re-coating. By using simple dish soap with water and a foam squeegee and your floor will look brand new.
Are you looking to get new flooring for your garage? Make sure to check out how the flooring specialists at Garage Tailors can help you. Call the professionals at 416.617.7551 today!
